Search
Close this search box.

Security in correspondence

Discretion plays an extremely important role in postal services. There is a risk that your letter or protective bag is opened by an unauthorised third party and not by the addressee you specified. We are able to offer our high-quality security tags so that you can be sure that the protective bags and envelopes have not been manipulated and are unopened when they reach their destination.

We are able to offer high-quality security tags for sealing protective bags. These tags fray out when they are removed, thus indicating access by third parties. Due to a special adhesive, visible tag remnants remain on the packaging when the security tag is removed. Security tags for packagings have a consecutive, unique serial number and can be tailored to accommodate your logo.

The serial number on the respective tag enables coded identification of your packagings, which can simplify work sequences. Make sure that your packagings are only opened by the addressee you have specified. We would be pleased to advise you.

Safety Labels

Tamper E. Security Label DF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanently adhesive document foil
✓ Security label disintegrates when removing
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
Tamper E. Security Label DF Studio

Tamper E. Security Label NTF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanent adhesive non-transfer film made of PET
✓ Security label leaves only on the label traces
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
Tamper E. Security Label NTF Studio

Tamper E. Security Label PF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanent adhesive polyester film
✓ Security label leaves visible traces in the form of a chessboard
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
Tamper E. Security Label PF Studio

Tamper E. Security Label PTF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanent adhesive partial-transfer film made of PET
✓ Security label leaves on package and label traces
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
Tamper E. Security Label PTF Studio

Tamper E. Security Label TTF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanent adhesive total-transfer film made of PET
✓ Security label leaves on package and label traces
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
Tamper E. Security Label TTF Studio

Tamper E. Security Tape NTF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanent adhesive partial-transfer film made of PET
✓ Security tape leaves only traces on the tape
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
Tamper E. Security Tape NTF Studio

Tamper E. Security Tape TTF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanent adhesive total-transfer film made of PET
✓ Security tape leaves on package and tape traces
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
Tamper E. Security Tape TTF Studio

Safety Bag

Document bags

✓ Document bag made of cotton with PVC coating
✓ Special water and tear resistance
✓ Sealing without additional tool
✓ Color, dimensions and marking are customer-specific
✓ Sealing is carried out by means of a plug-in or pull-through seal
Dokumententaschen Studio

Punch Pliers

Hole punch plier 13.2

✓ For hole punching of composite straps
✓ Throat depth: 13 mm
✓ Throat hight: 2 mm
✓ Hole punch: long hole 12,5 mm x 3 mm
✓ Permanent tension due to leg spring
Lochzange 13.2 Studio

Hole punch plier 21.2

✓ For hole punching for 2 layers of steel band
✓ Throat depth: adjustable from 9 mm up to 21 mm
✓ Throat hight: 2 mm
✓ Hole punch: long hole 15 mm x 3,5 mm
✓ Permanent tension due to leg spring
Lochzange 21.2 Studio

Hole punch plier 29.5

✓ For hole punching for 2 layers of steel band
✓ Throat depth: adjustable from 9 mm up to 29 mm
✓ Throat hight: 5 mm
✓ Hole punch: circle up to Ø 5 mm
✓ Very good power convserion through 250 mm lever length
Lochzange 29.5 Studio

Hole punch plier 40.2

✓ For hole punching of seal flags
✓ Throat depth: 40 mm
✓ Throat hight: 2 mm
✓ Hole punch: individually selectable up to Ø 5 mm
✓ Permanent tension due to leg spring
Lochzange 40.2 Studio

Hole punch plier 40.2 plus

✓ For hole punching of seal flags
✓ Throat depth: 40 mm
✓ Throat hight: 2 mm
✓ Hole punch: individually selectable up to Ø 12 mm
✓ Permanent tension due to leg spring
Lochzange 40.2 Plus Studio

Hole punch plier 53.8

✓ For hole punching for 2 layers of steel band
✓ Throat depth: adjustable from 6 mm up to 53 mm
✓ Throat hight: 8 mm
✓ Hole punch: circle from Ø 2 mm up to Ø 7 mm in 7 steps
✓ Adjustable throat depth and exchangeable inserts
Lochzange 53.8 Studio

Hole punch plier 60.2

✓ For hole punching of seal flags
✓ Throat depth: 60 mm
✓ Throat hight: 2 mm
✓ Hole punch: individually selectable up to Ø 5 mm
✓ Permanent tension due to leg spring
Lochzange 60.2 Studio

Hole punch pliers 50.2

✓ For hole punching of seal flags
✓ Throat depth: 50 mm
✓ Throat hight: 2 mm
✓ Hole punch: individually selectable up to Ø 15 mm
✓ Permanent tension due to leg spring
Lochzange 50.2 Studio

Notching plier 4.3

✓ For notching of seal flags
✓ Throat depth: 4 mm
✓ Throat hight: 3 mm
✓ Notch: individually selectable up to 5 mm x 5 mm
✓ Permanent tension due to leg spring
Kerbzange 4.3 Studio

Push in Seals

Push-In Seal DT 22.13

✓ Push-In seal for document bags
✓ ABS plastic [acrylonitrile butadiene styrene]
✓ Marking area: 14 mm x 11 mm
✓ Individual color selection
✓ Identification of a custom logo possible
Steckplombe DT 22.13 Studio

Push-In Seal DT 24.11

✓ Push-In seal for document bags
✓ ABS plastic [acrylonitrile butadiene styrene]
✓ Marking area: 12 mm x 11 mm
✓ Individual color selection
✓ Identification of a custom logo possible
Steckplombe DT 24.11 Studio

Push-In Seal DT 24.21,5

✓ Push-In seal for document bags
✓ ABS plastic [acrylonitrile butadiene styrene]
✓ Marking area: 12 mm x 21 mm
✓ Individual color selection
✓ Identification of a custom logo possible
Steckplombe DT 24.21,5 Studio

Push-In Seal MWB 16.30

✓ Push-In seals for reusable containers
✓ Plastic made of PP [polypropylene]
✓ Marking area: 30 mm x 14 mm
✓ Individual color selection
✓ Identification of a custom logo possible
Steckplombe MWB 16.30 Studio

Push-In Seal MWB 19.26

✓ Push-In seals for reusable containers
✓ Plastic made of PP [polypropylene]
✓ Marking area: 11,5 mm x 11 mm
✓ Individual color selection
✓ Identification of a custom logo possible
Steckplombe MWB 19.26 Studio

Push-In Seal MWB 20.14

✓ Push-In seals for reusable containers
✓ ABS plastic [acrylonitrile butadiene styrene]
✓ Marking area: 18 mm x 20 mm
✓ Individual color selection
✓ Identification of a custom logo possible
Steckplombe MWB 20.14 Studio

Push-In Seal MWB 23.30

✓ Push-In seals for reusable containers
✓ Plastic made of PP [polypropylene]
✓ Marking area: 30 mm x 14 mm
✓ Individual color selection
✓ Identification of a custom logo possible
Steckplombe MWB 23.30 Studio

Push-In Seal MWB 24.28

✓ Push-In seals for reusable containers
✓ ABS plastic [acrylonitrile butadiene styrene]
✓ Marking area: 5,5 mm x 14,5 mm
✓ Individual color selection
✓ Identification of a custom logo possible
Steckplombe MWB 24.28 Studio

Push-In Seal MWB 38.5

✓ Push-In seals for reusable containers
✓ ABS plastic [acrylonitrile butadiene styrene]
✓ Marking area: 14 mm x 20 mm
✓ Individual color selection
✓ Identification of a custom logo possible
Steckplombe MWB 38.5 Studio

Push-In Seal MWB 39.17

✓ Push-In seals for reusable containers
✓ Plastic made of PP [polypropylene]
✓ Marking area: 38 mm x 9 mm
✓ Individual color selection
✓ Identification of a custom logo possible
Steckplombe MWB 39.17 Studio

Push-In Seal SR 23.12

✓ Push-In seal for clamping rings of barrels
✓ Plastic made of PP [polypropylene]
✓ Marking area: 6 mm x 7 mm
✓ Individual color selection
✓ Identification of a custom logo possible
Steckplombe SR 23.12 Studio

Push-In Seal SR 36.19

✓ Push-In seal for clamping rings of barrels
✓ Plastic made of PP [polypropylene]
✓ Marking area: 35 mm x 7 mm
✓ Individual color selection
✓ Identification of a custom logo possible
Steckplombe SR 36.19 Studio

Push-In Seal SR 59.10

✓ Push-In seal for clamping rings of barrels
✓ ABS plastic [acrylonitrile butadiene styrene]
✓ Marking area: 13 mm x 13 mm
✓ Individual color selection
✓ Identification of a custom logo possible
Steckplombe SR 59.10 Studio

Push-In Seal SR 62.18

✓ Push-In seal for clamping rings of barrels
✓ Plastic made of PP [polypropylene]
✓ Marking area: 12,5 mm x 30 mm
✓ Individual color selection
✓ Identification of a custom logo possible
Steckplombe SR 62.18 Studio

On the safe side with Ferrotec safety labels

For the sealing of shipping bags, we offer high-quality security labels that fray when removed and thus indicate foreign access. When the security label is removed, a special adhesive leaves a visible residue of the label on the packaging. Security labels for packaging are given a consecutive unique serial number and can be customized with your logo.

The serial number of each label allows you to identify your packaging in code, which can simplify workflows. Ensure that your packages are only opened by your designated recipient.

Feel free to call us if you need more information.

FOR SURE | BE SURE
Your Ferrotec Team

Durch die Seriennummer des jeweiligen Etiketts können Sie Ihre Verpackungen codiert identifizieren, wodurch Arbeitsabläufe vereinfacht werden können. Stellen Sie sicher, dass Ihre Verpackungen nur von dem von Ihnen bestimmten Empfänger geöffnet werden.

Gern rufen Sie uns an, wenn Sie weitere Informationen benötigen.
 
FOR SURE | BE SURE
Ihr Ferrotec-Team