Assistentin Seite C
Search
Close this search box.

Reliable safeguarding of your pallets and cardboard packagings

Your pallets and cardboard packagings are provided with ideal protection by the suitable products made by Ferrotec GmbH. Your freight should not only have external protection, your goods should also be sealed properly inside the truck or in the container in order to eliminate manipulation or access by third parties. Pallets and cardboard packagings can be safeguarded in a variety of ways. If you want to safeguard the pallet against shifting, stabilise the edges of your freight, carry out strapping or just simply seal the goods: we have the solution for you. 

We have developed the FT Shield for clear identification whether a stranger has tampered with the pallets and cardboard packagings. The shield can be attached directly to the strap or composite strap on the pallet or cardboard packaging with the help of hole punch pliers and a pull-through seal. The FT Shield has been adapted to all weather conditions by using high-quality 1.4301 stainless steel.

Work sequences can be optimised by sealing the cardboard packagings and pallets and allocated to the respective freight by means of coding. Rely on security when transporting your goods and on fast, uncomplicated transport processing. Our seals save a lot of time and effort for carriers, are reliable and of premium quality. We would be pleased to advise you.

Security Label

Tamper E. Security Label DF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanently adhesive document foil
✓ Security label disintegrates when removing
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
PRODUKTDETAILS
Tamper E. Security Label DF Studio

Tamper E. Security Label NTF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanent adhesive non-transfer film made of PET
✓ Security label leaves only on the label traces
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
PRODUKTDETAILS
Tamper E. Security Label NTF Studio

Tamper E. Security Label PF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanent adhesive polyester film
✓ Security label leaves visible traces in the form of a chessboard
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
PRODUKTDETAILS
Tamper E. Security Label PF Studio

Tamper E. Security Label PTF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanent adhesive partial-transfer film made of PET
✓ Security label leaves on package and label traces
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
PRODUKTDETAILS
Tamper E. Security Label PTF Studio

Tamper E. Security Label TTF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanent adhesive total-transfer film made of PET
✓ Security label leaves on package and label traces
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
PRODUKTDETAILS
Tamper E. Security Label TTF Studio

Tamper E. Security Tape NTF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanent adhesive partial-transfer film made of PET
✓ Security tape leaves only traces on the tape
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
PRODUKTDETAILS
Tamper E. Security Tape NTF Studio

Tamper E. Security Tape TTF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanent adhesive total-transfer film made of PET
✓ Security tape leaves on package and tape traces
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
PRODUKTDETAILS
Tamper E. Security Tape TTF Studio

Ratchet Strap

Ferrostrap 2000.8A

✓ Ratchet strap according to DIN EN 12195-2
✓ Lashing capacity is 2.000 daN
✓ Length of the lashing tape is 8 m (0,5 m + 7,5 m)
✓ With galvanized double J-hook
✓ Large selection of colors for the lashing tape
PRODUKTDETAILS
Zurrgurt Ferrostrap 2000.8a Studio

Ferrostrap 4000.10A

✓ Ratchet strap according to DIN EN 12195-2
✓ Lashing capacity is 4.000 daN
✓ Length of the lashing tape is 10 m (0,5 m + 9,5 m)
✓ With galvanized double J-hook
✓ Large selection of colors for the lashing tape
PRODUKTDETAILS
Zurrgurt Ferrostrap 4000.10a Studio

Ferrostrap 500.6B

✓ Ratchet strap according to DIN EN 12195-2
✓ Lashing capacity is 500 daN
✓ Length of the lashing tape is 6 m (0,5 m + 5,5 m)
✓ With powder-coated S-hook
✓ Large selection of colors for the lashing tape
PRODUKTDETAILS
Zurrgurt Ferrostrap 500.6b Studio

Ferrostrap 5000.10A

✓ Ratchet strap according to DIN EN 12195-2
✓ Lashing capacity is 5.000 daN
✓ Length of the lashing tape is 10 m (0,5 m + 9,5 m)
✓ With galvanized double J-hook
✓ Large selection of colors for the lashing tape
PRODUKTDETAILS
Zurrgurt Ferrostrap 5000.10a Studio

Ferrostrap 800.6A

✓ Ratchet strap according to DIN EN 12195-2
✓ Lashing capacity is 800 daN
✓ Length of the lashing tape is 6 m (0,5 m + 5,5 m)
✓ With galvanized double J-hook
✓ Large selection of colors for the lashing tape
PRODUKTDETAILS
Zurrgurt Ferrostrap 800.6a Studio

Strapping Protection

FT Shield Set

✓ Security Seal according to ISO 17712:2013
✓ Additional protection of straps
✓ As a set with FT seal
✓ Hole punch pliers are required for sealing
✓ Made from rust-free V2A (mat. no. 14301) stainless steel
PRODUKTDETAILS
FT Shield Set Studio

Corner Protection

Corner Protector KSS 250.35D

✓ Corner protection made of PU
✓ Dimensions: 80 mm x 250 mm
✓ With closed fixation for the belt
✓ For lashing strap width 35 mm
✓ Corner protection adapts to the lashing strap
PRODUKTDETAILS
Kantenschutz KSS 250.35 Studio

Corner Protector KSS 280.50D

✓ Corner protection made of PU
✓ Dimensions: 100 mm x 280 mm
✓ With closed fixation for the belt
✓ For lashing strap width 50 mm
✓ Corner protection adapts to the lashing strap
PRODUKTDETAILS
Kantenschutz KSS 280.50 Studio

Corner Protector KSS 50.25F

✓ Corner protection made of PVC
✓ Dimensions: 50 mm x 500 mm
✓ With hose fixation for the belt
✓ For lashing strap width 25 mm
✓ Corner protection adapts to the lashing strap
PRODUKTDETAILS
Kantenschutz KSS 50.25 Studio

Corner Protector KSS 65.35F

✓ Corner protection made of PVC
✓ Dimensions: 65 mm x 500 mm
✓ With hose fixation for the belt
✓ For lashing strap width 35 mm
✓ Corner protection adapts to the lashing strap
PRODUKTDETAILS
Kantenschutz KSS 65.35 Studio

Corner Protector KSS 75.50F

✓ Corner protection made of PVC
✓ Dimensions: 75 mm x 500 mm
✓ With hose fixation for the belt
✓ For lashing strap width 50 mm
✓ Corner protection adapts to the lashing strap
PRODUKTDETAILS
Kantenschutz KSS 75.50 Studio

Corner Protector KSW 101×101.90B

✓ Corner protection made of PE
✓ Dimensions: 90 mm x 101 mm x 101 mm
✓ With open fixation for the belt
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
PRODUKTDETAILS
Kantenschutz KSW 101x101.90b Studio

Corner Protector KSW 115×115.90A

✓ Corner protection made of HDPE in different colors
✓ Dimensions: width x 115 mm x 115 mm
✓ Especially easy to use
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
PRODUKTDETAILS
Kantenschutz KSW 115x115.90a Studio

Corner Protector KSW 130×130.90B

✓ Corner protection made of PE
✓ Dimensions: 90 mm x 130 mm x 130 mm
✓ With open fixation for the belt
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
PRODUKTDETAILS
Kantenschutz KSW 130x130.90b Studio

Corner Protector KSW 131,5×179.90E

✓ Corner protection made of PE
✓ Dimensions: 144 mm x 131.5 mm x 179 mm
✓ With guide rail for fixing the belt
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
PRODUKTDETAILS
Kantenschutz KSW 1315x179.90e Studio

Corner Protector KSW 135×135.78D

✓ Corner protection made of PE
✓ Dimensions: 103 mm x 135 mm x 135 mm
✓ With closed fixation for the belt
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 78°
PRODUKTDETAILS
Kantenschutz KSW 135x135.78d Studio

Corner Protector KSW 135×135.90B

✓ Corner protection made of PE
✓ Dimensions: 90 mm x 135 mm x 135 mm
✓ With open fixation for the belt
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
PRODUKTDETAILS
Kantenschutz KSW 135x135.90b Studio

Corner Protector KSW 135×135.90D

✓ Corner protection made of PE
✓ Dimensions: 90 mm x 135 mm x 135 mm
✓ With closed fixation for the belt
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
PRODUKTDETAILS
Kantenschutz KSW 135x135.90d Studio

Corner Protector KSW 135×135.90D+

✓ Corner protection made of PE
✓ Dimensions: 100 mm x 135 mm x 135 mm
✓ With open fixation for the belt
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
PRODUKTDETAILS
Kantenschutz KSW 135x135.90d Studio

Corner Protector KSW 136,5×183.90A

✓ Corner protection made of HDPE in different colors
✓ Dimensions: width x 136 mm x 183 mm
✓ Especially easy to use
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
PRODUKTDETAILS
Kantenschutz KSW 136x183.90a Studio

Corner Protector KSW 146×195.88C

✓ Corner protection made of PE
✓ Dimensions: 145 mm x 146 mm x 195 mm
✓ With closed fixation for the belt
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 88°
PRODUKTDETAILS
Kantenschutz KSW 146x195.88c Studio

Corner Protector KSW 146×195.90E

✓ Corner protection made of PE or ABS
✓ Dimensions: 145 mm x 146 mm x 195 mm
✓ With guide rail for fixing the belt
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
PRODUKTDETAILS
Kantenschutz KSW 146x195.90e Studio

Corner Protector KSW 170×170.90A

✓ Corner protection made of HDPE in different colors
✓ Dimensions: width x 170 mm x 170 mm
✓ Especially easy to use
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
PRODUKTDETAILS
Kantenschutz KSW 170x170.90a Studio

Corner Protector KSW 190×190.90A

✓ Corner protection made of HDPE in different colors
✓ Dimensions: width x 190 mm x 190 mm
✓ Especially easy to use
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
PRODUKTDETAILS
Kantenschutz KSW 190x190.90a Studio

Sealing Pliers

Hole punch plier 13.2

✓ For hole punching of composite straps
✓ Throat depth: 13 mm
✓ Throat hight: 2 mm
✓ Hole punch: long hole 12,5 mm x 3 mm
✓ Permanent tension due to leg spring
PRODUKTDETAILS
Lochzange 13.2 Studio

Hole punch plier 21.2

✓ For hole punching for 2 layers of steel band
✓ Throat depth: adjustable from 9 mm up to 21 mm
✓ Throat hight: 2 mm
✓ Hole punch: long hole 15 mm x 3,5 mm
✓ Permanent tension due to leg spring
PRODUKTDETAILS
Lochzange 21.2 Studio

Hole punch plier 29.5

✓ For hole punching for 2 layers of steel band
✓ Throat depth: adjustable from 9 mm up to 29 mm
✓ Throat hight: 5 mm
✓ Hole punch: circle up to Ø 5 mm
✓ Very good power convserion through 250 mm lever length
PRODUKTDETAILS
Lochzange 29.5 Studio

Hole punch plier 40.2

✓ For hole punching of seal flags
✓ Throat depth: 40 mm
✓ Throat hight: 2 mm
✓ Hole punch: individually selectable up to Ø 5 mm
✓ Permanent tension due to leg spring
PRODUKTDETAILS
Lochzange 40.2 Studio

Hole punch plier 40.2 plus

✓ For hole punching of seal flags
✓ Throat depth: 40 mm
✓ Throat hight: 2 mm
✓ Hole punch: individually selectable up to Ø 12 mm
✓ Permanent tension due to leg spring
PRODUKTDETAILS
Lochzange 40.2 Plus Studio

Hole punch plier 53.8

✓ For hole punching for 2 layers of steel band
✓ Throat depth: adjustable from 6 mm up to 53 mm
✓ Throat hight: 8 mm
✓ Hole punch: circle from Ø 2 mm up to Ø 7 mm in 7 steps
✓ Adjustable throat depth and exchangeable inserts
PRODUKTDETAILS
Lochzange 53.8 Studio

Hole punch plier 60.2

✓ For hole punching of seal flags
✓ Throat depth: 60 mm
✓ Throat hight: 2 mm
✓ Hole punch: individually selectable up to Ø 5 mm
✓ Permanent tension due to leg spring
PRODUKTDETAILS
Lochzange 60.2 Studio

Hole punch pliers 50.2

✓ For hole punching of seal flags
✓ Throat depth: 50 mm
✓ Throat hight: 2 mm
✓ Hole punch: individually selectable up to Ø 15 mm
✓ Permanent tension due to leg spring
PRODUKTDETAILS
Lochzange 50.2 Studio

Notching plier 4.3

✓ For notching of seal flags
✓ Throat depth: 4 mm
✓ Throat hight: 3 mm
✓ Notch: individually selectable up to 5 mm x 5 mm
✓ Permanent tension due to leg spring
PRODUKTDETAILS
Kerbzange 4.3 Studio

Securing accessories for your pallets and cardboard boxes

For the perfect identification of whether a stranger has tampered with the pallets and cardboard boxes, we have developed the FT Shield, which can be attached directly to the strapping or composite strap of the pallet or cardboard box with the help of a punch and a pull-through seal. By using high quality stainless steel V2A, the FT Shield is adapted against all weather conditions.

By sealing the cardboard boxes and pallets, workflows can be optimized and assigned to the respective freight by coding. Place your trust in security when transporting goods and in fast, uncomplicated transport handling. Our seals save carriers a lot of effort, are reliable and of high quality.

Please feel free to call us if you need further information.


FOR SURE | BE SURE
Your Ferrotec Team