Assistentin Seite C

Securing parcels and packagings

Parcel delivery is one of the most frequently used forms of transportation of goods. It must also be guaranteed here that the contents of the packaging cannot be stolen or manipulated. Our packaging seals can help if you attach great importance to your parcels arriving at their destination in an unopened condition.

We are able to offer high-quality security tags for sealing packagings and that fray out when removed, thus indicating access by third parties or manipulation of the packed goods. Due to a special adhesive, visible tag remnants remain on the packaging when the security tag is removed. Security tags for packagings have a consecutive, unique serial number and can be tailored to accommodate your logo.

The serial number on the respective tag enables coded identification of your packagings, which can simplify work sequences. Make sure that your packagings are only opened by the addressee you have specified. We would be pleased to advise you.

Security Label

Tamper E. Security Label DF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanently adhesive document foil
✓ Security label disintegrates when removing
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
Tamper E. Security Label DF Studio

Tamper E. Security Label NTF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanent adhesive non-transfer film made of PET
✓ Security label leaves only on the label traces
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
Tamper E. Security Label NTF Studio

Tamper E. Security Label PF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanent adhesive polyester film
✓ Security label leaves visible traces in the form of a chessboard
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
Tamper E. Security Label PF Studio

Tamper E. Security Label PTF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanent adhesive partial-transfer film made of PET
✓ Security label leaves on package and label traces
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
Tamper E. Security Label PTF Studio

Tamper E. Security Label TTF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanent adhesive total-transfer film made of PET
✓ Security label leaves on package and label traces
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
Tamper E. Security Label TTF Studio

Tamper E. Security Tape NTF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanent adhesive partial-transfer film made of PET
✓ Security tape leaves only traces on the tape
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
Tamper E. Security Tape NTF Studio

Tamper E. Security Tape TTF

✓ Indicative Seal according to ISO 17712:2013
✓ Permanent adhesive total-transfer film made of PET
✓ Security tape leaves on package and tape traces
✓ Marking with your logo and coding possible
✓ Safety effect after 48h gluing time
Tamper E. Security Tape TTF Studio

Strapping Protection

FT Shield Set

✓ Security Seal according to ISO 17712:2013
✓ Additional protection of straps
✓ As a set with FT seal
✓ Hole punch pliers are required for sealing
✓ Made from rust-free V2A (mat. no. 14301) stainless steel
FT Shield Set Studio

Corner Protection

Corner Protector KSS 250.35D

✓ Corner protection made of PU
✓ Dimensions: 80 mm x 250 mm
✓ With closed fixation for the belt
✓ For lashing strap width 35 mm
✓ Corner protection adapts to the lashing strap
Kantenschutz KSS 250.35 Studio

Corner Protector KSS 280.50D

✓ Corner protection made of PU
✓ Dimensions: 100 mm x 280 mm
✓ With closed fixation for the belt
✓ For lashing strap width 50 mm
✓ Corner protection adapts to the lashing strap
Kantenschutz KSS 280.50 Studio

Corner Protector KSS 50.25F

✓ Corner protection made of PVC
✓ Dimensions: 50 mm x 500 mm
✓ With hose fixation for the belt
✓ For lashing strap width 25 mm
✓ Corner protection adapts to the lashing strap
Kantenschutz KSS 50.25 Studio

Corner Protector KSS 65.35F

✓ Corner protection made of PVC
✓ Dimensions: 65 mm x 500 mm
✓ With hose fixation for the belt
✓ For lashing strap width 35 mm
✓ Corner protection adapts to the lashing strap
Kantenschutz KSS 65.35 Studio

Corner Protector KSS 75.50F

✓ Corner protection made of PVC
✓ Dimensions: 75 mm x 500 mm
✓ With hose fixation for the belt
✓ For lashing strap width 50 mm
✓ Corner protection adapts to the lashing strap
Kantenschutz KSS 75.50 Studio

Corner Protector KSW 101×101.90B

✓ Corner protection made of PE
✓ Dimensions: 90 mm x 101 mm x 101 mm
✓ With open fixation for the belt
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
Kantenschutz KSW 101x101.90b Studio

Corner Protector KSW 115×115.90A

✓ Corner protection made of HDPE in different colors
✓ Dimensions: width x 115 mm x 115 mm
✓ Especially easy to use
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
Kantenschutz KSW 115x115.90a Studio

Corner Protector KSW 130×130.90B

✓ Corner protection made of PE
✓ Dimensions: 90 mm x 130 mm x 130 mm
✓ With open fixation for the belt
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
Kantenschutz KSW 130x130.90b Studio

Corner Protector KSW 131,5×179.90E

✓ Corner protection made of PE
✓ Dimensions: 144 mm x 131.5 mm x 179 mm
✓ With guide rail for fixing the belt
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
Kantenschutz KSW 1315x179.90e Studio

Corner Protector KSW 135×135.78D

✓ Corner protection made of PE
✓ Dimensions: 103 mm x 135 mm x 135 mm
✓ With closed fixation for the belt
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 78°
Kantenschutz KSW 135x135.78d Studio

Corner Protector KSW 135×135.90B

✓ Corner protection made of PE
✓ Dimensions: 90 mm x 135 mm x 135 mm
✓ With open fixation for the belt
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
Kantenschutz KSW 135x135.90b Studio

Corner Protector KSW 135×135.90D

✓ Corner protection made of PE
✓ Dimensions: 90 mm x 135 mm x 135 mm
✓ With closed fixation for the belt
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
Kantenschutz KSW 135x135.90d Studio

Corner Protector KSW 135×135.90D+

✓ Corner protection made of PE
✓ Dimensions: 100 mm x 135 mm x 135 mm
✓ With open fixation for the belt
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
Kantenschutz KSW 135x135.90d Studio

Corner Protector KSW 136,5×183.90A

✓ Corner protection made of HDPE in different colors
✓ Dimensions: width x 136 mm x 183 mm
✓ Especially easy to use
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
Kantenschutz KSW 136x183.90a Studio

Corner Protector KSW 146×195.88C

✓ Corner protection made of PE
✓ Dimensions: 145 mm x 146 mm x 195 mm
✓ With closed fixation for the belt
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 88°
Kantenschutz KSW 146x195.88c Studio

Corner Protector KSW 146×195.90E

✓ Corner protection made of PE or ABS
✓ Dimensions: 145 mm x 146 mm x 195 mm
✓ With guide rail for fixing the belt
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
Kantenschutz KSW 146x195.90e Studio

Corner Protector KSW 170×170.90A

✓ Corner protection made of HDPE in different colors
✓ Dimensions: width x 170 mm x 170 mm
✓ Especially easy to use
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
Kantenschutz KSW 170x170.90a Studio

Corner Protector KSW 190×190.90A

✓ Corner protection made of HDPE in different colors
✓ Dimensions: width x 190 mm x 190 mm
✓ Especially easy to use
✓ For lashing strap width up to 50 mm
✓ Corner protection angle 90°
Kantenschutz KSW 190x190.90a Studio

Punch Pliers

Hole punch plier 13.2

✓ For hole punching of composite straps
✓ Throat depth: 13 mm
✓ Throat hight: 2 mm
✓ Hole punch: long hole 12,5 mm x 3 mm
✓ Permanent tension due to leg spring
Lochzange 13.2 Studio

Hole punch plier 21.2

✓ For hole punching for 2 layers of steel band
✓ Throat depth: adjustable from 9 mm up to 21 mm
✓ Throat hight: 2 mm
✓ Hole punch: long hole 15 mm x 3,5 mm
✓ Permanent tension due to leg spring
Lochzange 21.2 Studio

Hole punch plier 29.5

✓ For hole punching for 2 layers of steel band
✓ Throat depth: adjustable from 9 mm up to 29 mm
✓ Throat hight: 5 mm
✓ Hole punch: circle up to Ø 5 mm
✓ Very good power convserion through 250 mm lever length
Lochzange 29.5 Studio

Hole punch plier 40.2

✓ For hole punching of seal flags
✓ Throat depth: 40 mm
✓ Throat hight: 2 mm
✓ Hole punch: individually selectable up to Ø 5 mm
✓ Permanent tension due to leg spring
Lochzange 40.2 Studio

Hole punch plier 40.2 plus

✓ For hole punching of seal flags
✓ Throat depth: 40 mm
✓ Throat hight: 2 mm
✓ Hole punch: individually selectable up to Ø 12 mm
✓ Permanent tension due to leg spring
Lochzange 40.2 Plus Studio

Hole punch plier 53.8

✓ For hole punching for 2 layers of steel band
✓ Throat depth: adjustable from 6 mm up to 53 mm
✓ Throat hight: 8 mm
✓ Hole punch: circle from Ø 2 mm up to Ø 7 mm in 7 steps
✓ Adjustable throat depth and exchangeable inserts
Lochzange 53.8 Studio

Hole punch plier 60.2

✓ For hole punching of seal flags
✓ Throat depth: 60 mm
✓ Throat hight: 2 mm
✓ Hole punch: individually selectable up to Ø 5 mm
✓ Permanent tension due to leg spring
Lochzange 60.2 Studio

Hole punch pliers 50.2

✓ For hole punching of seal flags
✓ Throat depth: 50 mm
✓ Throat hight: 2 mm
✓ Hole punch: individually selectable up to Ø 15 mm
✓ Permanent tension due to leg spring
Lochzange 50.2 Studio

Notching plier 4.3

✓ For notching of seal flags
✓ Throat depth: 4 mm
✓ Throat hight: 3 mm
✓ Notch: individually selectable up to 5 mm x 5 mm
✓ Permanent tension due to leg spring
Kerbzange 4.3 Studio

Safety Bag

Document bags

✓ Document bag made of cotton with PVC coating
✓ Special water and tear resistance
✓ Sealing without additional tool
✓ Color, dimensions and marking are customer-specific
✓ Sealing is carried out by means of a plug-in or pull-through seal
Dokumententaschen Studio

Security with high quality security labels

For the sealing of packaging, we offer high-quality security labels that fray when removed and thus indicate access by strangers or tampering with the packaged goods. When the security label is removed, a special adhesive leaves a visible residue of the label on the packaging. Security labels for packaging are given a consecutive unique serial number and can be customized with your logo.

The serial number of each label allows you to identify your packaging in code, which can simplify workflows. Ensure that your packaging is only opened by your designated recipient.

Feel free to call us if you need more information.

FOR SURE | BE SURE
Your Ferrotec Team